Products

Wave Traps™

Wave Trap™ WT-7

Create professional sounding recordings and mixes by controlling the acoustics in your studio with the Wave Trap™ WT-7.  The WT-7 is a 7.5” portable and configurable broadband cylindrical acoustic absorber.  This compact acoustical absorber boasts a 23.5” X 38” outer surface area, a volume of 1,678.46 cubic inches and a weight of 6.14 lbs. Layers of carefully crafted acoustic materials are combined with a balanced inner air chamber to create the WT-7's exceptionally effective broadband absorption from 16Khz down to 112hz.  The WT-7 is the most re-configurable of all the Wave Trap™ sizes.  The WT-7 is part of our Pro Mix X4™, The Wave Array™, The Wave Stand™, The Wave Wall™, The Wave Field™ and many other useful applied Wave Trap™ configurations. The WT-7 is great for mixing as well as recording. Vocalists and podcasters will especially benefit by spinning the WT-7 and engaging the 8.5Khz and above diffuser side effectively adding or subtracting acoustic warmth or brightness on your recordings.

Download Cut Sheet

SPECIFICATIONS

 

Product ID : Wave Trap WT-7

Height : 38”

Diameter : 7.5”

Weight : 6.14 lbs.

Circumference : 23.5”

Effective Range : 112hz - 16khz

Mounting : 1/4-20 center end.

End Caps : 1-1/2” MDF

Fabric : Black Audio Transparent

Diffusion : 38% 8.5khz - 16khz

MSRP $349.00

Wave Trap™ WT-11

Create professional sounding recordings and mixes by controlling the acoustics in your studio with the Wave Trap™ WT-11.  The WT-11 is an 11.5” portable and configurable broadband cylindrical acoustic absorber.  This mid-sized acoustical absorber with an outstanding 36.11” X 38” outer surface area, a volume of 3,946.68 cubic inches and a weight of 12.5 lbs. is extremely effective. Layers of carefully crafted acoustic materials are combined with a balanced inner air chamber create the WT-11’s exceptionally effective broadband absorption from 16Khz down to 80hz.  The WT-11 is an expanded WT-7 bringing 2.5 times the effective absorption with an extended low frequency.  The WT-11 is great for high-pressure zone applications such as our Pro Mix X4™, Wave Wall™, Wave Stand™, and Wave Field™. The WT-11 is great for horizontal ceiling placement over your mix position to create a sweet spot, or around a drum kit or guitar amp to help you achieve that professional studio sound. Ordered with -R for reinforced the WT-11 also makes a fantastic monitor stand for small to mid sized monitors that can hold up to 40lbs each.

Download Cut Sheet

SPECIFICATIONS

 

Product ID : Wave Trap WT-11

Height : 38”

Diameter : 11.5”

Weight : 12.5 lbs.

Circumference : 36.1”

Effective Range : 80hz - 16khz

Mounting : 1/4-20 center end.

End Caps : 1-1/2” MDF

Fabric : Black Audio Transparent

Diffusion : 38% 8.5khz - 16khz

MSRP $417.00

Wave Trap™ WT-16

Create professional sounding recordings and mixes by controlling the acoustics in your studio with the Wave Trap™ WT-16.  The WT-16 is a 17” portable and configurable cylindrical bass trap and broadband absorber.  This large bass trap acoustical absorber has a massive 53.38” X 38” outer surface area, a volume of 8,625.24 cubic inches and a weight of 25.29 lbs. Layers of carefully crafted acoustic materials are combined with a balanced inner air chamber to create the WT-16’s exceptionally effective low frequency absorption from 16Khz down to 52hz.  The WT-16 is the largest Wave Trap™ in our standard line.  The WT-16 is great for high-pressure low frequency applications such as our Pro Mix X4, Wave Stand™ and Wave wall™. The WT-16 is built for low frequency control and is most effective in corners or near sub woofers where room modes accumulate. Ordered with -R for reinforced the WT-16 also makes a fantastic monitor stand for small to mid sized monitors that can hold up to 50lbs each.  There is no better way to trap bass than the original Waveforms™ Wave Trap™ WT-16.

Download Cut Sheet

SPECIFICATIONS

 

Product ID : Wave Trap WT-16

Height : 38”

Diameter : 17”

Weight : 25.29lbs.

Circumference : 53.38”

Effective Range : 52hz - 16khz

Mounting : 1/4-20 center end.

End Caps : 1-1/2” MDF

Fabric : Black Audio Transparent

Diffusion : 38% 8.5khz - 16khz

MSRP $547.00

Wave Trap™ Options and Accessories

Color Fabrics  WT-7-C / WT-11-C / WT-16-C

Add style and color to your Wave Trap™ Waveforms currently offers the following  colors for and additional fee. End caps remain black.

 

Custom fabrics in any color and pattern along with custom exotic wood and / or colored end caps are available as a custom order. Call Waveforms™ to discuss your color and fabric ideas and we will provide a quote.

 

Red

Tan

Orange

White

Navy

Download Cut Sheet

MSRP $15.00

WT-R Vertical Reinforcement (each)

If you are planning to put your monitors or something else that weighs more then 15 lbs. on top of your Wave Trap™

it is important to select the internal vertical reinforcement option. This option adds additional internal vertical support to hold up to 40lbs. on a WT-11 and 50 lbs. on a WT-16.

Download Cut Sheet

MSRP $116.00

WT-EB Black Eye Bolt, (set of two)

This includes two black eye bolts with locking nut and washers. Each Wave Trap™ has a 1/4-20 threaded socket centered on each end cap. These are connection points and hanging points to accept any 1/4-20 threaded hardware.

Download Cut Sheet

MSRP $27.00

WT-WB Wave Bracket™ (each)

Our Wave Bracket™ is a "W" shaped connection plate made of lightweight but strong 7 ply birch and coated in our classic black coating. The underside has an 1/8" foam rubber layer for a vibration free connection to each Wave Trap™. This connection plate is used to create our Wave Stand™ and many other configurations, even those you may create yourself. This is a unique and innovative item limited only by your imagination.

Download Cut Sheet

MSRP $253.00

WT-WF Wave Feet™ (set of four)

Our Wave Feet™ are a set of four rubber feet that would mount to the bottom W plate when used to sit on a floor or table top.

Download Cut Sheet

MSRP $34.00

WT-AB Wave Array™ Brackets (set of two)

Our 36" Wave Array Bracket™ is a black power coated aluminum connection bar that when used in pairs with (4) WT-7's creates our Wave Array™. The Wave Array™ is an integral component in treating walls and ceilings. The Wave Array™is also used  in creating an acoustic isolation curtain between your listening area and the room.

Download Cut Sheet

MSRP $224.00

WT-WP Wave Pad™ Monitor Vibration Isolation Pad (each)

Our 12" X 12" X 6" Wave Pad™ Provides superior vibration isolation between your monitor speakers and the surface they are resting on. In order to obtain a true sound reproduction from your monitor speakers it is necessary to isolate and decouple the speaker from the surface it is resting on. Our Wave Pad™ is constructed of 3 layers of carefully selected materials that are strong enough to hold the weight of your speakers while still providing superior isolation.

Download Cut Sheet

MSRP $155.00

Waveforms USA

Waveforms USA

Murrieta, CA 92563

(213) 536-1701

sales@waveformsusa.com